For Sale Oil Coolers
Close
    
    
Page 1 of 35 12311 ... LastLast
Results 1 to 10 of 346
Like Tree504Likes

Thread: For Sale Oil Coolers

  1. #1
    Senior Member mekdad's Avatar
    Join Date
    Jan 2012
    Location
    idaho
    Posts
    168

    For Sale Oil Coolers

    Tec Specs:
    All threaded holes are 1/4 npt.
    Adaptor, Cooler, and 49 state bracket are made from 6061 aluminum.
    All fittings are 1/4 inch brass hose barbs. These are standard fittings that you can find any where if you need to.
    Hose clamps are stainless steel.
    Hose is the same stuff Russ wuz using. So you know its good. (That high rent stuff.) Good year took their name off of it. (Continental Contitech InstaGrip is what it is. Took me forever to find it)

    Pretty much every thing you could possibly ask is answered in this thread. I suggest anyone that buys any part or kit read this thread before you purchase.
    There is a ton of great information, and ideas for people who like to tinker, on this thread.
    TW200 Engine Oil Cooler

    These are made to be as tough, rugged, and functional as the mighty TW 200. If you manage to break the cooler or adapter, (I want pictures of the bike and your hospital bill.) I will replace it.

    Pricing:
    All prices include shipping in the lower 49 states. If you are from outside the U.S.A. we will have to work that out.

    Adaptor only (adapter no fittings) $75.00

    Cooler only (cooler no fittings) $75.00

    Complete kit (adaptor, cooler, fittings, clamps, 30 inches of hose, 49 state bracket) $220.00

    California Kit (same as the complete kit no 49 sate bracket) $200.00

    49 State bracket (with Stainless Steel 1/4-20 bolts and washers) $25.00

    Hose (the high rent stuff) $4.00 per foot plus shipping (because I don't know how much you need.)

    Hose barbs and clamps are standard that you can find at any hardware store. It does not make sense for me to sell them to to you when you can save shipping and handing and pick them up local.


    How to buy:

    Send me an e-mail with your name, forum name, full address, what and how many you would like to buy.

    My e-mail: kwaymco@gmail.com


    Thank you,
    Ken

    P.S. Now we can all stay cool.
    Fred, littletommy, dmo and 10 others like this.
    You never know what you can do until you have to undo something you have done.

  2. #2
    Senior Member jbfla's Avatar
    Join Date
    Jul 2010
    Location
    FL. GA, NC
    Posts
    2,207
    Email sent.

    What are the payment options? PayPal? Money order?

    jb
    2017 Triumph Bonneville T-120.......2015 CSC Zong
    2014 XT250 ..................................2008 H-D Softail Deluxe
    2008 SV 650..................................2007 DR 650..

  3. #3
    Senior Member Moabman's Avatar
    Join Date
    Mar 2014
    Location
    UTAH
    Posts
    190
    Is this the long-awaited Lizrdbrth cooler set?

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Senior Member Fred's Avatar
    Join Date
    Dec 2011
    Location
    Turtle Wrangling the Sierras
    Posts
    12,424
    The fittings, clamps and 30" of hose appear to be valued at $50, anything special about them other than the $4/ft hose? Standard hardware/ automotive items like stainless steel u-bolts, 1/4" hydraulic line and brass 1/4"npt barbs?
    cowboyjeff likes this.
    Active Thumpers:
    2003 TW200 "Betty Boop"
    2006 TW200 "Mr.Gizmo”
    Neglected 2-Smoker Hanger Queens:
    1981 KDX175 Enduro
    1982 YZ250G MX
    Hidden Content

  6. #5
    Senior Member mekdad's Avatar
    Join Date
    Jan 2012
    Location
    idaho
    Posts
    168
    Yes it is.
    You never know what you can do until you have to undo something you have done.

  7. #6
    Senior Member mekdad's Avatar
    Join Date
    Jan 2012
    Location
    idaho
    Posts
    168
    Quote Originally Posted by Fred View Post
    The fittings, clamps and 30" of hose appear to be valued at $50, anything special about them other than the $4/ft hose? Standard hardware/ automotive items like stainless steel u-bolts, 1/4" hydraulic line and brass 1/4"npt barbs?
    We put it all together with teflon tape, and the only thing you have to do bolt it on cut he hose to the right length tighten the clamps. This is how you receive them.
    Shipping is included also.

    20150817_112850.jpg
    Last edited by mekdad; 08-17-2015 at 11:45 AM.
    You never know what you can do until you have to undo something you have done.

  8. #7
    Member Fantom's Avatar
    Join Date
    Jun 2013
    Posts
    57
    E-mail sent for one complete kit.

  9. #8
    Senior Member mekdad's Avatar
    Join Date
    Jan 2012
    Location
    idaho
    Posts
    168
    Quote Originally Posted by Fred View Post
    The fittings, clamps and 30" of hose appear to be valued at $50, anything special about them other than the $4/ft hose? Standard hardware/ automotive items like stainless steel u-bolts, 1/4" hydraulic line and brass 1/4"npt barbs?
    I was told by a few different people at a time in the past that they would like a ready to bolt on kit, that they did not have to go find all the required hardware for. That is why it is offered as a kit. I have no problem just selling you the adaptor and cooler and let you do the foot work for the other stuff. Thats what I would do.

    So I buy the parts, I have one of my guys assemble everything, put it in a box and send it as a kit. That takes time. I have to pay my employee's
    Please don't take that as me being upset. I am not. Just understand I am not a one man show, and my time, and my employees time has to get paid for.
    You never know what you can do until you have to undo something you have done.

  10. #9
    Senior Member Moabman's Avatar
    Join Date
    Mar 2014
    Location
    UTAH
    Posts
    190
    Very fair, and well worth it! You have invested so much into this project and are offering us something that we couldn't have otherwise. Thank you for what you have done and continue to do for us all...
    TWilight, dmo, mekdad and 3 others like this.

  11. #10
    Senior Member mekdad's Avatar
    Join Date
    Jan 2012
    Location
    idaho
    Posts
    168
    I would like to thank all of you that placed an order so far today. We will start shipping your orders first thing in the morning.
    There has been a big response. We are starting the next run of parts now so we do not get behind.All orders should be shipped out the next working day after we get it.
    You never know what you can do until you have to undo something you have done.

Page 1 of 35 12311 ... LastLast

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Lizrdbrth... Oil cooler kits, adapters, coolers...lizrdbrth
    By ronnydog in forum Performance and Customization
    Replies: 66
    Last Post: 08-17-2015, 11:20 AM
  2. Soft Coolers
    By TopPredator in forum Off-Topic
    Replies: 59
    Last Post: 05-07-2015, 07:53 PM
  3. Polar Bear Coolers 1/2 off sale is on.
    By CaptD in forum General Discussion
    Replies: 6
    Last Post: 11-05-2011, 06:43 PM
  4. oil coolers
    By jake100 in forum Technical Help
    Replies: 3
    Last Post: 07-25-2011, 09:34 AM

Search tags for this page

lizrdbrth oil cooler

,

lzrbrth oil cooler tw 200

Click on a term to search for related topics.